How to Install Wire Fencing for Dogs

Consider what type of wire fence you would like. There are two different types of wire fences that people typically use to restrain dogs. Both will keep dogs in your yard, but they differ in durability and price.

• Chain link fence: These tend to be more expensive than other forms of wire fencing, but they are strong and durable. They will last a long time, and they are compliant with many housing associations' guidelines. That said, the large holes in the chain link can make it easy for strangers to stick in hands or objects to taunt your dog.
• Farm fence: These are cheap fences made from wire mesh stretched out over fence posts. They will not obstruct views in your yard, but they can corrode and may need frequent maintenance.^[1]

Dig holes for your corner posts. If you choose to use wooden posts for your fence, the first step to building a wire fence for your dog is to dig holes for your corner posts. Since corner posts have more tension on them than line posts (the posts in between your corner posts), the holes dug for them need to be deeper. The holes for your corner posts should be about 2 ½ to 3 feet (.76 to .91 meters) deep.

• You can use a hand-held clamshell post digger for most jobs. However, if you have a lot of posts or the ground is rocky and tough to dig, an auger, or drill-like tool, might be helpful.^[2]
• If the ground where you are placing your posts is wet or made of clay, you will need deeper holes for your posts.

Place your corner posts in the holes. Corner posts need to be sturdier than your line posts. Generally, your corner posts should be about 6 to 8 inches (15 to 20 centimeters) in diameter and about 7 to 8 feet (2 to 2.5 meters) long. Place these posts in your corner holes and fill in the hole with just enough soil to keep them from moving around.

• Hold a level vertically to the side of the post to make sure it is straight.^[3]

Dig holes for your brace posts. You should install a brace post for every fence line leading to your corner post. The brace post helps take some tension off the corner post and keeps it from falling down or becoming loose. Dig holes for these posts that are 2 ½ to 3 feet (.76 to .91 meters) deep, like you did for your corner posts. The brace post should be approximately 8 feet away from the corner post, along the fence line.

Place your brace posts in the holes. As you did with the corner posts, place your brace posts in the holes you’ve dug and fill in a bit of the soil to keep them in place. Hold a level vertically along the side of the post to make sure it is straight before filling it in.

Fill in your corner and brace post holes. Once you have your corner and brace posts in place and level, fill in the holes with dirt, clay, or sand to keep the posts in place. You must pack the dirt, clay, or sand down as you go to make sure the post is solid. Add a little dirt at a time, making sure you pack it down well after each bit you add.

• You can use a long board, hoe, a pipe with a curved end, or similar items to pack down the dirt. This will help you pack the dirt tightly and keep you from scraping your knuckles against the wooden posts in the process.^[4]
• For fences that need to be extra secure, you can pour concrete into the post hole and secure it in the ground this way.

Install a brace wire. Once you have your corner and brace posts secured in the ground, install a brace wire between the two to stabilize the posts. This brace wire will run diagonally from the bottom of your corner post to the top of your brace post. To secure the wire, start a fence staple at both the bottom of your corner post and the top of your brace post. Start the wire through the staple on your corner post and run it up through the staple at the top of your brace post, around the top of the brace post, and back down and around your corner post. Once you have the wire in place, drive the staples in tightly. Staple any loose wire to the post as well.

• Brace wire is sold at most supply stores. It is usually 9-gague and flexible. It is not the same as fence wire.^[5]

Add a crosspiece between the corner and brace posts. Once your brace wire is in place, add a wooden crosspiece in between the top of your corner post and brace post. The crosspiece should be long enough to fit snuggly between the two posts (about 8 feet or 2.5 meters long). Make a notch on the inside of each post that you can slip the crosspiece into and secure it in place using nails.

• You can also use pipe, old steel fence posts, or even bed rails as your crosspiece.^[6]

Create a brace lever. You’ll need to apply tension to the brace wire to make your corner and brace posts even more sturdy. To do so, cut a piece of wood, pipe, rod, or a similar sturdy material to about 16 inches (41 centimeters) long. Place one end of this lever at the top corner of your brace post, in between the two brace wires you just secured. Twist the lever until the wires are as tight as possible. Once you have them taut, rest the other end of the lever against the crosspiece. It will stay here on its own as long as there is enough tension.^[7]

Dig holes for your line posts. Stretch a wire or cord between your corner and brace assemblies to determine where to place your line posts. Line posts should be placed about 15 to 20 feet (4.5 to 6 meters) apart. You can use spray paint to mark where to dig the holes for these posts. Using the clamshell post digger or auger, dig holes to a depth of 2 to 2 ½ feet (.61 to .76 meters).

Install your line posts. Once you’ve dug the holes for your line posts, place your wooden posts in them and fill them in, adding a bit of dirt, clay, or sand at a time and packing it down well.