How to Melt Coconut Oil

Thứ bảy - 27/04/2024 01:10

Table of contents

Coconut oil melts from its solid form at 76°F (24°C) into a liquid which is commonly used in cooking, health, and beauty products. If you live in a warmer location, your coconut oil might already be ready to use at any time, as it will already be in liquid form. However, if you live in a colder climate, you can easily melt the coconut oil using hot water, a microwave, or a stovetop.

Method 1

Method 1 of 3:

Using Hot Water

This method is useful if you want to melt a whole jar at once. Make sure that the sink is full enough for the container to be completely submerged by the water.
You could also use a bucket instead if the whole sink is too big to fill up.

Make sure that the lid is screwed on tight. The water should be higher than the lid of the jar, otherwise the oil won't melt evenly.
If the container floats in the water, place something heavy on top of it. A plate works well for keeping the coconut oil submerged in the hot water.

Advertisement

It will take between 1 to 2 minutes for the oil to fully melt. Dry off the container with a tea towel, and then measure out the amount of liquid coconut oil you need.
After you measure out the amount of coconut oil you need, it will solidify again if the temperature is below 76°F (24°C).^{[1] X Research source}

Advertisement

Method 2

Method 2 of 3:

Melting in a Microwave

Use a sturdy spoon to take out some solid coconut oil from the container. Place this into a measuring cup or spoon, and pack it down to get an accurate measurement.
If the coconut oil is very hard and brittle, use a tablespoon and scrape it repeatedly across the surface. The oil that has been scraped away will form a paste consistency.

Spoon the coconut oil out of the measuring cup or spoon and into the dish. Using a lid on the microwave dish will also help to keep your microwave clean.

Coconut oil melts relatively fast using a microwave, so small time intervals work best. For reference, it takes roughly 45 seconds to melt ½ cup of coconut oil in the microwave.^{[2] X Research source}

The actual time that it will take for the coconut oil to melt will depend on the make and wattage of your microwave.

Between each 10-second interval, give the coconut oil a good stir to help it melt evenly.^{[3] X Research source}

Advertisement

Method 3

Method 3 of 3:

Using a Stovetop

Use a measuring spoon or cup to determine the amount of coconut oil that you will need. Similar to flour or other baking products, pack the coconut oil down, and smooth off the edges when being measured to get the most precise amount.^{[4] X Research source}
If scraping the solid coconut oil is proving difficult and you use it regularly, an ice cube tray may be useful. Melt a container of coconut oil, and then distribute it across an ice cube tray. Refrigerate the coconut oil until solid again, and then you have small portions ready to be used at ease.^{[5] X Research source}

Use a small pot over a low heat, and stir the coconut oil regularly. This is especially useful if you want to use the same pot for cooking with the coconut oil once it has melted, such as for popping popcorn.^{[6] X Research source}
You can use a frying pan instead to heat the coconut oil. This is helpful if you are planning to fry chicken or make pancakes using the oil.

This means that the melted coconut oil is ready to use. If you have accidentally melted too much, it will solidify again at a cool enough temperature.

Advertisement